High-tech Energy-efficient Guest Rooms with TIS- Energy management in hotels is a challenging issue for owners. From the desired temperature to their favorite light level, guests are more inclined to return for an additional stay when they can customize their room to suit their preferences. However, providing these features using old technology wastes plenty of energy. For example, there are a lot of difficulties with the old card key switches. Guests can put any card in the old switches, or they may ask for more than one card. Even if hotel desk refuses to give more than one card to a guest, she/he might claim to have lost the card.
The conventional old technology of hotel card switch. Additionally there is a lot of over usage of lights and AC energy due to things running even though guests aren’t within their rooms, and also this can cause an economic loss for the owner. Of course, no hotel owner wants to prohibit guests from having a comfortable stay, nor do owners expect guests to enter a dark or cold accommodation. Nobody is to blame. Both guests and hotel owners have the authority to fulfill their interests.
Some hotel owners think when they separate the AC from the main network, less energy will likely be consumed, while others believe that motion sensors are the solution. However, these approaches fail to resolve the situation. The AC is easily the most energy-consuming device of, and motion sensors can be nightmares because they only function based upon movement detection, which means the AC and lights might go off while a guest is sleeping or reading a magazine. Nightmarish!
The TIS Automation Company offers the best solution for hotel guest rooms by introducing its innovative technology in a smart ceiling sensor: Energy Servant. Our Energy Servant blows past classic hotel card switches with being able to detect human presence in a room. This ceiling-mounted sensor has several options, such as a PIR motion sensor, a mild harvest sensor, 2X digital inputs, infrared emitters compatible with all split AC types, TV brands infrared codes, temperature sensor, 24X flags, and 32 lines of logic and timers.
TIS Energy servant, the new method for hotel energy saving technology. By installing this door sensor at the entrance to a room, connecting it towards the Energy Servant’s digital input, and programming the logic lines, the situation of room occupancy is entirely resolved.
The subsequent logics can be defined for this sensor to control room energy with no discomfort for guests:
Logic 1: If you have any movement inside the room, the occupancy mode is going to be on.
Logic 2: When the main door is opened and closed, a flag will activate for just one minute to check if there is certainly movement in room. If no movement is detected after one minute, the system will activate energy-saving mode. This can be valuable in situations each time a guest enters the area briefly. In energy-saving mode all lighting is off aside from a nightlight, which stays on for 3 hours just in case there is another guest taking a nap. Also, the AC is definitely not turned off, however its temperature will likely be decreased by 2 degrees. It will help save energy with time.
Logic 3: In the event the energy-saving mode is enabled and no movement is detected for more than 3-5 hours, the nightlight and AC will be switched off automatically. It is additionally easy to define lower temperature levels for the AC. In addition, the vitality Servant can make the AC on/off when it understands that a balcony window/door is open. All of this requires is adding a magnetic contact connected to the balcony window/door and programming the required smart decision. The light harvest sensor helps save energy by wscgid balcony lights off if you have enough sun light.
Another practical and beneficial ability of this sensor is its built in thermostat, which will help maintain the right temperature constantly. This will be significant for keeping furniture fresh and intact. Also, in hot spots and even if the room is empty for a long time, humidity and bad smells will never become a problem inside the room. This sensor may be programmed to alter AC to dry mode if the room temperature reaches or exceeds 28-30C degree. This may happen repeatedly in the daytime if necessary. A similar performance can be programmed in cold spots to avoid mold.
Another choice of the smart device is TV control. When the hotel provides the guest using a room tablet, she/he has the capacity to control the room’s TV by using it. This sensor was set up in 20 rooms in the Fairmount Blue Mountain Hotel in Sydney. The end result was considerably enhanced energy management and many satisfactory comments from guests who enjoyed their luxurious remain at this hotel.
TIS offers the opportunity to meet both hotel owners and guests interests and desires with just a couple items as well as in the most energy-efficient possible way. For additional information or to plan a consultation, give us a call at www.tiscontrol.com